首页
联系我们

关于我们
测试测量 | 虹科首页
航空航天测试方案 生产制造测试方案 半导体测试方案 硬件 软件 支持
首页 > 硬件 > 所有总线接口 > QCP-1553系列

QCP-1553系列:1553航空电子接口3U cPCI板卡

  • One, two, or four MIL-STD-1553A/B Interfaces with full Error Injection and Detection
  • IRIG-B Time Code Receiver / Generator
  • Selectable direct or transformer coupling
  • Single or multi-function configurations
  • 3U cPCI Instrument (3U PXI compatible)

本文地址:http://www.otraw.com/DAQ/MTS/CategoryMain/Bus+Interfaces/QCP-1553+Series.html
文章摘要:QCP,表字杜微慎防永业,易用性羊触藩篱笃笃。

 

 

 

 

Description
The QCP-1553 module is a rugged, reliable, full featured, Compact PCI module designed to provide a stand-alone, MIL-STD-1553A/B interface for avionics applications. Up to four independent dual redundant MIL-STD-1553 databus streams are supported by the 3U QCP-1553 module. Additionally, the module offers full functional test, simulation, monitoring and databus analyzer functions for MILSTD-1553A/B applications. An onboard IRIG-B time code decoder and generator allows users to accurately synchronize single or multiple QCP-1553 modules to a common time source. The QCP-1553 module is available in single or full function (RT simulation, monitoring, and bus controller) configurations.

 

 

Features

The QCP-1553's standard features include selectable transformer or direct coupling, 1 Mbyte of RAM per channel, 45-bit message timetagging, triggers, extensive BC & RT link-list structures, error injection/detection, avionics level discretes, automatic/manual RT Status Bit and Mode Code responses, along with advanced BC functionality. An IRIG-B signal Receiver/Generator supports DC / TTL signaling for the generator and AM or DC/TTL signaling for the receiver. With the highest speed encoder/decoder in the industry, the QCP-1553 Bus Monitor provides unparalleled error detection and 100% monitoring of a fully loaded buses.

QCP-1553 multi-function interfaces are easily configured to operate as a simultaneously as a Bus Controller, 31 Remote Terminals and as a Bus Monitor.
Single-function QCP-1553 interfaces have all the features and functionality of the multi-function versions, but only one major operational mode is enabled at a time. Each interface can emulate either a Bus Controller or 31 Remote Terminals or a Bus Monitor.

Bus Controller Features

  • Programmable control over:
      - Major and minor frame content and timing
      - Intermessage gap times
      - Response time-out and late response
      - Multiple BC retry
  • Modify messages, data or setup while card is running
  • Insert aperiodic messages into a running BC list
  • “Oneshot“ mode for simplified BC operation
  • Conditional message sequencing based on real-time message data or status
  • Selectable interrupt generation and status messages on a full range of system conditions or all detected errors
  • Full error detection:
      - Invalid word
      - Late response
      - Bit count error
      - Early response
      - High word
      - No response
      - Low word
      - Incorrect RT address
      - Inverted sync
      - Parity error
      - Manchester error
  • Extensive programmable error injections (on a per word basis)
  • Synchronize BC operation to an external time source
 

Remote Terminal Features

  • Multiple RT simulation (up to 31 RTs)
  • Programmable error injection (on a per word basis)
  • Modify data, status words or setup while card is running
  • Programmable message content (linked message buffers)
  • Interrupts can be generated on a per message basis upon
  • End of Message and error conditions
  • RT Map Monitoring

Bus Monitor Features

  • Capture 100% fully loaded bus traffic with:
      - Time-tagging - Error status
      - Word status - Message status
      - RT response time
  • Interrupts can be selected by RT / SA / WC
  • Extensive filtering and triggering options:
      - By individual RT/subaddress
      - Transmit, receive or broadcast mode codes
      - Internal or external triggering
      - Trigger output on user specified data
  • Real-time bus playback with RT edit mode

Software

The QCP-1553 module is supplied with an API for Windows 9x-Windows 7, Linux, VxWorks. An ATEasy driver, sample code, high level C and C++ interface libraries, and documentation is also provided.

 

 

Applications

  • Automatic Test Equipment (ATE)
  • LRU and SRU test
  • System level test
 
1396cp北京赛车pk10 > 电子测试 > MTS 测试测量产品和解决方案
测试产品和解决方案
航空航天测试系统
生产制造测试系统
半导体测试系统
硬件
软件
PXI 仪器

公司
招聘人才
关于虹科
公司新闻

加关注


关于虹科
虹科积极进取,1396cp北京赛车pk10:不断探索科技新领域。最优秀的员工和最好的技术能够接受最困难的挑战。为您找到最佳解决方案。虹科靠口碑赢得客户。

北京:010-5781 5040 | 上海:021-6728 2707 | 西安:029-8187 3816 | 1396cp北京赛车pk10广州:400 999 3848 | 成都 028-6138 2617
沈阳 024-8376 9335 | 深圳 0755-2267 7479 | 武汉 027-8193 9100 | 香港 6749 9159 | 伦敦 74 3120 4210

sales@www.otraw.com | 广州虹科电子科技有限公司 | 版权所有 | 广州科学城科汇金谷三街2-701

北京赛车pk10稳定计划 北京pk10开奖网站 pk10赛车机器人免费版 pk10悉7 北京赛车pk10直播下载
北京赛车pk10计划 北京赛车五行大师 时时彩和北京赛车 pk10模拟投注盘 北京赛车pk10大小单双
北京pk10经验论坛 pk10手机开奖直播视频 北京赛车pk10冷号 北京赛车pk10接口源码 北京pk10大小路珠
pk10开奖直播视频官网 北京pk10赛车大群 pk10投注方法 pk10幸运盒子 北京赛车挂机软件